two component
Preferably glossy or matte
Forming a flexible and hard film
It is an aliphatic isocyanate curing paint.
Polyurethane Topcoat Paint is used to color the floor after the self-leveling layer on polyurethane floors and generally to determine the playing areas. Polyurethane Topcoat Paints not only color the floor but also have a very high resistance structure. Since Polyurethane topcoat paint provides the greatest resistance on the floor, it is a UV resistant aliphatic paint with very high resistance to abrasions and scratches.
Colour
In desired colors
Intensity
1.20 kg/l (in mixture)
Solids/Volume
56% ± 1
V.O.C.
352g/l
Recommended Dry Film Thickness
40-80 μm for single coat
80-160 μm in total for two coats
Theoretical Consumption Amount
11.6 m²/kg
Drying Time
5 hours (20°C)
Full Curing
7 days (20°C)
NOTES*
Drying times may vary depending on air temperature, applied film thickness, ventilation and environmental conditions. As air temperature decreases, drying times will increase.
PACKAGING- 9+3 kg metal
Application Recommendations
Mixing Ratio, By Volume
2.5 Part Component A +1 Part Component B
Mixing Ratio, by Mass
3 kg Component A + 1 kg Component B
Application Time
7-8 hours (20°C)
Application Methods
It can be applied with airless gun, pistol and brush.
Thinning (with polyurethane thinner) By Volume
Airless gun: 20-30%
Pistol: 30%
Brush: 5-10%
Airless Gun Application Information
Application Time: 5 hours
Nozzle Diameter: 0.021 inch
Nozzle Pressure: 150 bar/2100 psi
*Airless information is a suggestion and should be adapted to the application conditions.
Equipment Cleaning
With polyurethane thinner.
Waiting Time Between Floors
8 hours (20°C)
*Waiting time between coats varies depending on the atmospheric conditions where the paint is applied.
Surface Preparation
Clean the surface from oil and grease with a suitable detergent.
Wash surfaces contaminated with dirt, dust, salt and mud with fresh water at high pressure.
Application Terms
During application, make sure that the surface is thoroughly free of dirt, oil and grease.
Before applying the next coat on surfaces that have been in a dirty environment for a long time, the surface must be cleaned with water and left to dry. After the surface has dried thoroughly, the next coat must be applied.
To prevent moisture in the air from condensing on the surface, the surface temperature should be at least 3°C higher than the dew point of the air.
Application Procedure
It is recommended to follow the following rules when applying the Kenncoat Polyurethane Topcoat Paint system:
Before preparing the mixture, each component must be mixed separately.
Components A and B should be mixed for 5 minutes.
To avoid problems in use, the paint should not be diluted more than 30%.
Small application errors should be repaired with a brush, larger application errors should be repaired with spray.
If applied in closed areas, adequate ventilation must be provided.
As soon as the application is completed, clean all application equipment with a suitable recommended thinner.
Technical documents are not available for direct download. Leave your details and we will email the document.
