It is a high-strength polyurethane-based panel adhesive product used for bonding xps, eps, plasterboards, polystyrene panels, decorative panels, sandwich panels and wooden panels.
It is a two-component, solvent-free, polyurethane-based adhesive.
Colour - Various colors
Intensity- 1.51- 1.56 kg/L
Viscosity- (20oC) 4000-6000 cP
Mixing ratio - (by mass) 21/4
Hardness- (Shore A) 77-80
Application time and temperature- 10-30 min and 10-25° C
Touch Dry- 6-8 hours
Heat Resistance -Approx. 100°C (Cured product)
A and B components by mass 21 kg A and 4 kg B
Pot Life 15-40 minutes (Varies depending on weather and humidity conditions.)
Application Methods Level comb, trowel, spatula or squeegee.
Equipment Cleaning Ethyl acetate, butyl acetate or cellulosic thinner is used.
Surface Preparation The ground must be clean, dry, free of dust and oil, repaired, and if it is to be applied on concrete, the concrete must be laid at least 22 days ago.
Application Terms There should be no moisture, dust, dirt, rust and oil on the application surface.
All mixed material should be consumed within the usage period.
Application Procedure It is recommended to follow the following rules during application.
21 kg of component A and 4 kg of component B should be mixed with a slow speed mixer for at least 2 minutes. All ingredients should be used without dividing them. After the hardener is used all at once, the cap should be closed tightly. A notched trowel should be used to apply the paste. It should be protected from water for 8-10 hours.
Technical documents are not available for direct download. Leave your details and we will email the document.
