It is a two-component, solvent-free, polyurethane-based, self-leveling, anti-static material used in outdoor applications.
Two Component
Self-leveling antistatic
waterproof
Chemical and abrasion resistant
It is a coating material used to give flexibility to the floor.
Colour- in various colors
Intensity- 1.15-1.17kg/L
Viscosity (23C)- 2000-2500 cP
Mixing ratio (by mass)- 5/4
Hardness (Shore A)- 65-70
Application time and temperature-10-30 min and 10-25° C
Touch Dry- 6-8 hours
Heat Resistance- Approximately 100°C (Cured product)
450 kg metal barrel packaging in sets
Mixing ratio- 5kg A and 4kg B
Pot Life- 15-40 minutes (Varies depending on weather and humidity conditions.)
Application Methods- Squeegee or trowel
Equipment Cleaning- Ethyl acetate, butyl acetate or cellulosic thinner is used.
Surface Preparation- The ground must be clean, dry, free of dust and oil, repaired, and if it is to be applied on concrete, the concrete must be laid at least 22 days ago.
Application Terms- There should be no moisture, dust, dirt, rust and oil on the application surface.
All mixed material should be consumed within the usage period.
Application Procedure- It is recommended to follow the following rules during application.
22.5 parts of component A and 18 parts of component B should be mixed with a slow speed mixer for at least 2 minutes. All ingredients should be used without dividing them.
The cap should be closed tightly after the hardener has been used all at once.
A squeegee or trowel should be used for application.
It should be protected from water for 8-10 hours.
Technical documents are not available for direct download. Leave your details and we will email the document.
