It is used on concrete, screed concrete, wood, rubber and similar surfaces after the polyurethane primer to fill the gaps on the surface and prepare a good surface for the floor covering.
Two Component
Solvent-free
It is polyurethane based putty.
Colour
Grey, white and other colors
Intensity
1.36 (±0.02) kg/l
hardness degree
Shore A: 75 ± 5
Application Temperature
10-25°C
Theoretical Consumption Amount
1) Prefabricated Roll Top: 1st layer 400 gr/m², 2nd layer 100 gr/m²
2) Cast Assembly with On-Site Finisher: 1st layer 1460 gr/m², 2nd layer 160-200 gr/m²
Note: Consumption amounts vary depending on rubber roll density and granule diameter.
Curing Time
6-8 hours 25°C
Heat Resistance
Approximately 100°C (For cured product)
A and B components by mass 18 kg A and 2 kg B
Application Recommendations
Mixing Ratio, By Volume
3.4 Part Component A +1 Part Component B
Mixing Ratio, by Mass
5.25 kg Component A + 1 kg Component B
Application Time
15-40 minutes (Varies depending on weather and humidity conditions)
Application Materials
Level comb, trowel, spatula or squeegee
Equipment Cleaningi
Ethyl acetate, butyl acetate or cellulosic thinner
Surface Preparation
The ground is clean, dry, free of dust and oil, repairs have been made, if the concrete
If it will be applied on top of the concrete, it must have been placed at least 22 days ago.
Application Terms
There should be no moisture on the application surface.
All mixed material should be consumed within the usage period.
Application Procedure
Polyurethane putty is obtained by mixing 5.25 parts by weight of component A and 1 part of component B.
It is recommended to follow the following rules during application;
It should be mixed with a slow speed mixer for at least 2 minutes.
All ingredients should be used without dividing them.
The cap should be closed tightly after the hardener has been used all at once.
A trowel or toothless spatula should be used to apply the paste.
It should be protected from water for 8-10 hours.
Technical documents are not available for direct download. Leave your details and we will email the document.
