Application Methods By roller, brush or spray
applicable. Apply and touch
1 after it dries
It should be kept at 120 °C for hours.
Equipment Cleaning Can be done with thinner
Surface Preparation Clean the surface from oil and grease with a suitable detergent. Wash surfaces contaminated with dirt, dust, salt and mud with fresh water at high pressure. Remove moisture.
Application Terms During application, make sure that the surface is thoroughly free of dirt, oil and grease. Before applying the top coat on surfaces that have been in a dirty environment for a long time, the surface must be cleaned and then paint must be applied. To prevent moisture in the air from condensing on the surface, the surface temperature must be at least 3 °C higher than the dew point of the air. The air temperature during application should be between 5 °C and 45 °C.
Application Procedure It is recommended to follow the following rules during application.

Before use, the equipment should be cleaned with a suitable thinner. The paint must be mixed before application. To ensure homogeneity, mixing should be done at regular intervals during use. If applied in closed areas, adequate ventilation must be provided. After it is touch dry, it should be cured at 120 °C for 1 hour.

Technical Documents