This bitumen-based, polymer-modified waterproofing product; It consists of two parts: a liquid component consisting of fiber-reinforced rubber-bitumen emulsion and a cement-based powder component enriched with chemical additives. It can be used in the insulation of foundations and curtain walls of buildings, as well as in the insulation of areas such as balconies and terraces. It is suitable for application on mineral-based surfaces such as concrete, screed, plaster and mortar, and can be used as two-component or single-component.
This bitumen-based, polymer-modified waterproofing product; It consists of two parts: a liquid component consisting of fiber-reinforced rubber-bitumen emulsion and a cement-based powder component enriched with chemical additives. It can be used in the insulation of foundations and curtain walls of buildings, as well as in the insulation of areas such as balconies and terraces. It is suitable for application on mineral-based surfaces such as concrete, screed, plaster and mortar, and can be used as two-component or single-component.
Before applying primer to the surfaces to be insulated, surface smoothness, surface dryness and cleanliness, and sufficient slope screed should be checked. After these conditions are met, it is applied to the surface with a brush or gun at an amount of 400 grams per square meter and waited until it dries completely. If necessary, it can also be used by diluting it with 20% water. It dries in approximately 4-5 hours depending on weather conditions. In two-coat applications, the next coat should not be applied before the first coat is completely dry.
Technical documents are not available for direct download. Leave your details and we will email the document.
