Kenncoat Cushion; It is a water-based and acrylic binder-based material and is applied in two types, either as a thin layer prepared with 0 mm powder or as a thin layer prepared with 0.5-1.5 mm coarse rubber granules. It is used to give flexibility to the surface.
Product
Kenncoat Cushion
Binding
Acrylic
Minimum Application Temperature
10°C
Drying Temperature
1 hour (25°C) (To apply the second coat, wait 2-6 hours and observe that the surface is completely dry.)
Colour
Gray
Theoretical Consumption Amount
Kenncoat Cushion theoretical consumption amount is 350-500 gr/m².
It varies depending on the floor, temperature and workmanship.
Packaging Type: 60 kilogram plastic drum
Consumption: It is 350-500 g/m2. It varies depending on the floor, temperature and workmanship.
Surface Preparation
The surface on which Kenncoat Cushion will be applied must be free of dust, dirt and oil.
There should be no water on the surface.
The temperature on the ground where Kenncoat Cushion will be applied is minimum 10°C and maximum 35°C.
Application Procedure
Kenncoat Cushion is applied with a squeegee or squeegee.
Equipment Cleaning
The equipment used is cleaned by washing it with water.
Technical documents are not available for direct download. Leave your details and we will email the document.
